Appendix Vii: Software Revision History - Siemens sitrans LR 400 Instruction Manual

Appendix VII: Software Revision History

Software
Revision
2.00 January 1, 200222
2.10 February 5, 2002
2.20 August 27, 2002
2.30 January 23, 2003
2.40 April 23, 2003
3.00 April 1, 2004
7ML19985JC02 SITRANS LR 400 (Solids) – INSTRUCTION MANUAL
Date
• Original software release
• Corrected HART board reset.
• Updated many menu items.
• Improved multiple echo detection when
only two echoes occur.
• Resolution of TVT increased.
• Leading edge detection improved.
• TVT is no longer reset on factory reset.
• Sensitivity of the display-mounted keys
increased.
• Level damping max value increased.
• Silo2 default settings changed.
• Corrected S/N value of over 700 being
displayed when the auto noise order
was set to 0
• First Echo algorithm improvement
• Sensitivity of the display-mounted keys
reduced.
• Alarm mode relays now latches during
alarm.
• Removed support for the front keypad;
added support for the hand
programmer.
• Added dynamic TVT hover level feature.
• Added translations to support both
English and German.
• Moved all the USER1 and USER2
service fields to the standard DD under
new folder called "Advanced Echo
Processing"
• Added support for new parameters
(hover level and window trigger)
• Changes to the echo profile graph in
SIMATIC PDM to correspond to other
Siemens Milltronics products.
• Cleanup/addition of default values and
help messages
• Added manual TVT shaper command to
SIMATIC PDM.
Changes
Page 105