Siemens sitrans LR 400 Instruction Manual page 63

Note: For parameter descriptions, please refer to the associated HART parameters on
pages 27 to 56.
Parameter, menu
identification
3.1.1. 1 : Operating
hours
3. 1 . 1 .2: Maximum
temp.
3. 1 . 1 .3: Minimum
temp.
3.1. 1 .4: Aging
>
85°C
3.1.1.5: Hours
3. 1 .x: Sensor
and/or
3.1.x: Electronics
and/or
3. 1 .x: Software
and/or
3. 1 .x: Application
and/or
3. 1 .x: Parameters
and/or
3. 1 .x: Service
3.2: Device test
3.2.1: Self-test
3.2.2: Display test
3.3: Simulation
3.3.1: Error Simula-
tion for Micro High
Word
3.3.2: Error Simula-
tion for Micro Low
Word
Page 60 SITRANS LR 400 (Solids) – INSTRUCTION MANUAL
Parameters (PROFIBUS PA)
Description
Total previous operating
time of the device in
hours (approximate
value)
Last recorded maximum
internal temperature of
device
Last recorded minimum
internal temperature of
the device
Approximate value for the
prior life of the device in
% (100% = approx. 10
years)
Total time the maximum
permissible internal tem-
perature (85 °C) was
exceeded, in hours
Diagnostic messages of
the sensor
Diagnostic messages of
the electronics
Diagnostic messages of
the software
Diagnostic messages to
the application
Display of the false
parameters
For qualified personnel
only
Check device state
Visual check of LCD
For factory service purposes only
For factory service purposes only
Factory Setting
Setting Possibilities
non-editable
26°C non-editable
26°C non-editable
non-editable
non-editable
non-editable
non-editable
non-editable
non-editable
non-editable
non-editable
non-editable
non-editable
7ML19985JC02