Using Additional Handsets; Registering A New O1 Handset; Registering Another Type Of Handset To Your O1 Base - Motorola O101 User Manual

9. Using additional handsets

You can use up to five GAP compatible handsets with your O1 base to extend your phone
system without needing to install extension sockets for each new phone.
Your O1 handset can be registered to up to 4 bases. You can then select the base you
would prefer to use.
You need to register any additional handsets you purchase to your O1 base.
NOTE
Additional handsets must be fully charged before attempting to register.
9.1

Registering a new O1 handset

At the base:
p
1. Press and hold
2. The base will now remain in registration mode for 90 seconds, during which time you
will need to complete the following procedure.
At the new handset:
1. Press to open the main menu.
u d
2. Press or until
u d
3. Press or to highlight
4. Enter a base number (from 1 to 4) and press
registered to a base, the base number will flash.
5. Enter the 4 digit PIN code and press
the base is located, your handset will display the base ID number, press
confirm registration to this base or cancel by pressing
The handset is automatically allocated the next available handset number which is
displayed when in standby mode.
NOTE
If registration is unsuccessful, the handset will return to standby mode. Try moving closer to
the base you want to register to and following the registration procedure again.
9.2

Registering another type of handset to your O1 base

At the base:
p
1. Press and hold
2. The base will now remain in registration mode for 90 seconds, during which time you
will need to complete the registration procedure shown in the other manufacturer's
user manual.
Using additional handsets
until you hear a beep, then release it.
Register is displayed, then press
Reg Base and press
until you hear a beep, then release it.
.
.
. If the handset is already
. (Default PIN code setting is 0000) When
.
to
31