Restore Default Settings Without A Pin - Motorola O101 User Manual

u d
2. Press or until
u d
3. Press or to select
4. Enter the 4 digit PIN code and press
5. CONFIRM? is displayed, press
then switch back on again with the default settings restored.
NOTE
Please note, restoring the default settings will delete your phonebook, redial and calls list.
6.8

Restore default settings without a PIN

If you have forgotten your PIN code, you can restore your O1 to the default settings
following the procedure shown below.
1. Unscrew and remove the belt clip and battery compartment cover.
2. Remove the batteries for a few minutes. Press and hold
button, insert the batteries again observing the polarity markings (+ and -).
3. Default is displayed, press
When the phone powers up, the default settings will be restored.
4. Replace the battery compartment cover and belt clip.
26
Setup is displayed, then press
Default and press
to confirm the reset. The handset will switch off,
.
.
.
. (Default PIN code setting is 0000)
, while still pressing the
Base settings