6. Base settings
6.1
Base ringer volume
The base has 6 ringer volume settings: Off and 1–5 where, 1=low and 5=high.
1. Press
to open the main menu.
u
d
2. Press
or
until
3.
Base Volume
is displayed, press
u
d
4. Press
or
to highlight the volume you require and press
5. Press
repeatedly to exit and return to standby.
NOTE
You will hear a sample ring at the base for all settings (except Off).
6.2
Base ringer melody
The base has 5 ringer melodies to choose from.
1. Press
to open the main menu.
u
d
2. Press
or
until
u
d
3. Press
or
to select
4. Use
u
or
d
to hear and select a melody. Press
5. Press
repeatedly to exit and return to standby.
6.3
PIN code
Your O1 has a security PIN code which you will need to change some of the settings
on your phone. The default PIN code is 0000. You may want to change this to prevent
unauthorised changes to your settings.
1. Press
to open the main menu.
u
d
2. Press
or
until
u
d
3. Press
or
to select
4. Enter the current 4 digit PIN code and press
5. Enter a new 4 digit PIN code and press
6. Re-enter the new PIN code and press
7. Press
repeatedly to exit and return to standby.
NOTE
For security when you enter each digit of the PIN code it will be displayed as a *.
6.4
Dial mode
The dialling mode is pre-set to Tone (DTMF) dialling. If you are using your O1 phone with
an older type of switchboard/PBX you may required to change this setting to Pulse dialling.
24
Setup
is displayed, then press
Setup
is displayed, then press
Base Melody
and press
Setup
is displayed, then press
Pin Code
and press
.
.
.
.
to confirm your selection.
.
.
.
.
.
to confirm.
Base settings