Table of Contents
Advertisement
12. Wall mounting
IMPORTANT
Before you wall-mount your O1, check that you are not drilling into any hidden wiring or
pipes.
Before you drill, make sure the power and telephone line cables will reach the sockets.
1. Use the following templates to mark the drilling locations.
•
To wall-mount the base, drill two holes in the wall 4.9cm apart horizontally using an
8mm drill bit.
3cm
•
To wall-mount the charger, drill two holes in the wall 3.0cm apart horizontally using an
8mm drill bit.
Wall mounting
4.9cm
4.9cm
3cm
4.9cm
3cm
41
Hide quick links:
Advertisement
Table of Contents
