User-Defined Modbus Addressing; Mechanical Design - Moxa Technologies ioLogik E1210 Manual

Industrial I/O
Patented Automatic Tag Generation
Patented "Auto Tag Generation" eliminates the headache of specifying
target IP addresses, I/O channels, and data formats one by one, or
editing and importing configuration text files since Active OPC Server
Lite creates the tags for the target ioLogik automatically. One of the
General OPC Server
Active OPC Server

User-defined Modbus Addressing

To control an input or output channel of a remote Ethernet I/O device
running the most general Modbus/TCP protocol requires specifying
the Modbus address of those input and output channels. This can take
quite a bit of effort since you may need to look up the address and data
type in the user's manual for address mapping, and can also cause
problems once the I/O channels change or a device is replaced.

Mechanical Design

DIN and Wall Mountable
The ioLogik E1200 is designed with a vertical form factor, and can be
used with both DIN-Rail and Wall Mounting.
4
5 steps for channels, interfaces, and protocol definition: takes
13 steps for device, IP address, and other communication parameters: takes
1 step for looking up address table: takes
Select channels and press
Create Tags Create Tags
It takes 5 seconds to create 20 or more tags
biggest payoffs is that users will no longer need to be trained to install
and configure your OPC system, since setting up Active OPC Server
Lite is done automatically with a single click of the mouse.
20
100 seconds.
button to update configuration: takes 5 seconds.
The ioLogik E1200's user-defined Modbus addressing offers the
flexibility to make the Modbus address dynamic, and the address can
be configured to be compatible with other Modbus devices. When a
system is being replicated, or the filed I/O is being replaced, the user-
defined Modbus eliminates the effort of reconfiguring the PC control
software or field controller.
Stress-relief for Solid Wiring
A stress-relief connector at the bottom of the ioLogik E1200 helps
prevent the wiring from being pulled out.
seconds.
It takes 2.5 min.
30 seconds.
to create only
1 tag
ioLogik
w w w. m o x a . c o m i n f o @ m o x a . c o m