Download Print this page

Ordering Guide - Keysight Technologies E4990A Configuration Manual

Impedance analyzer 20 hz to 10/20/30/50/120 mhz
Hide thumbs Also See for E4990A:

Advertisement

02 | Keysight | E4990A Impedance Analyzer - Configuration Guide

Ordering Guide

The following steps will guide you through configuring your E4990A.
Standard furnished item
Description
Installation guide
CD ROM IO libraries
100 Ω resistor
Powercable
Certificate of calibration
Step 1. Choose frequency (Mandatory)
Frequency range
Option no.
20 Hz to 120 MHz
E4990A-120
20 Hz to 50 MHz
E4990A- 050
20 Hz to 30 MHz
E4990A- 030
20 Hz to 20 MHz
E4990A- 020
20 Hz to 10 MHz
E4990A- 010
Step 2. Choose frequency reference (if not required, go to Step 3)
Description
High stability frequency
reference
Note: Refer to Hardware Upgrade for retrofit information on the above options.
Step 3. Choose software option (If not required, go to Step 4)
Description
Enhanced measurement speed
Step 4. Choose accessory option (If not required, go to Step 5)
Description
Rackmount kit
Front handle kit
Handle/rackmount kit
Keyboard
Mouse
Note: Refer to Hardware Upgrade for retrofit information on the above options.
Additional information
Contains the information necessary to start up with the E4990A.
100 Ω load resistor module for 4-terminal pair extension. See Available Accessories (General/Miscellaneous
Measurement Accessories) for additional information.
Support fixtures
4-terminal pair fixtures
Support
Support
Option no.
Requires
E4990A-1E5
None
Option no.
Requires
E4990A-001
E4990A-050,
030, 020 or
010
Option no.
Requires
E4990A-1CM
None
E4990A-1CN
None
E4990A-1CP
None
E4990A-810
None
E4990A-820
None
42941A impedance probe
Support
Not support
Not compatible
Additional information
This option improves the frequency accuracy and stability of
the E4990A. BNC Adapter is supplied with E4990A-1E5.
Not compatible
Additional information
E4990A-120
Make the measurement speed faster as the same as
E4990A-120. See the measurement time data in the E4990A
datasheet (5991-3890EN).
Not compatible
Additional information
E4990A-1CP
E4990A-1CP
E4990A-1CM
E4990A-1CN
None
None
42942A + 7mm fixtures
Support
Not support
www.keysight.com/find/impedance

Advertisement

loading