Connection; Standard Connection; Mode - Toshiba IK-4KE Instruction Manual

DC IN 12V terminal
12
REMOTE terminal
13
SYNC IN/OUT terminal
14
3G/HD-SDI A, B, C, D terminal Image signal output terminal for 3G/HD-SDI formats. (BNC connector)
15
KEY LOCK switch
16
FORMAT switch
17
SYNC switch
18

5. CONNECTION

5. 1 Standard Connection

5. 1. 1 In case output mode is 4K
Lens
(commercial
product)
Camera Cable
for IK-4KE
Camera
Head
IK-4KH
(option)
* 3G/HD-SDI A, B, C, D terminals and screen positioning are shown below.
DC IN 12V A B
1 4
2 3
REMOTE
KEY LOCK
ON
1 2 3 4 5
6 7 8 9
OFF
Accepts a DC power input (12V).
To connect to a RS-232C device for remote control function.
Used when the camera output signal is synchronized to an external signal or
when a synchronized signal is output. (BNC connector)
Enables/disables buttons
Switches between 59.94Hz and 50Hz.
Switches between input and output of synchronized signals from
SYNC IN/OUT terminals in
IK-4KE
Control unit
（option）
3G/HD-SDI
C D
SYNC IN/OUT
FORMAT SYNC
50 IN
59.94 OUT
4 to 11 .
.
14
3G/HD-SDI
x 4
Camera
DC IN 12V
DC power supply
(option)
10
Coaxial cable × 4, 75
(commercial
product)
4K monitor
3G-SDI × 4 TV input
(commercial product)
Upper left Upper right
Lower left Lower right