7 ) Sync; (7. 1) Int Screen; (7. 2) Changing Ext. Setting - Toshiba IK-4KE Instruction Manual

( 7 ) SYNC

When an external sync signal is input, the display changes from INT (internal sync) to EXT. (external sync)
automatically.

(7. 1) INT screen

-- 7 SYNC --
MODE

(7. 2) Changing EXT. setting

Move up and down
by pushing
MENU UP, DOWN
-- 7 SYNC --
MODE
H PHASE
(a) Adjusting horizontal phase
When in EXT mode, the " " will be at H PHASE.
1
Select the desired value of horizontal phase by pushing the [DATA UP], [DATA DOWN] buttons.
2
* If the phase difference is big, keep pressing [DATA UP]/[DATA DOWN] button for a while. This will make the setting
change by increments of ten.
INT
(FILE A)
INT
Select the desired
value by pushing
DATA UP, DOWN
(FILE A)
EXT
0
[DATA UP]
-650
[DATA DOWN]
31
EXT
Sync system display
Sync system display
H PHASE -650 to 650
0 650