( 8 ) OPTION
Move up and down by
pushing MENU UP, DOWN
-- 8 OPTION
SHADING
DTL OUT
FLIP
MIRROR
STATUS DISP
FREEZE DISP
OSD OUTPUT
OUTPUT MODE
BAUD RATE
(8. 1) Changing shading correction mode
Move the " " to SHADING by pushing the [MENU UP], [MENU DOWN] buttons.
1
Select SET, MANUAL or OFF by pushing the [DATA UP], [DATA DOWN] buttons.
2
(8. 2) Changing manual shading correction mode
Move the " " to MANUAL by pushing the [MENU UP], [MENU DOWN] buttons.
1
Select the desired value of manual shading correction by pushing the [DATA UP], [DATA DOWN] buttons.
2
* When the shading correction mode is set to anything other than MANUAL, the display turns off, and the setting
cannot be adjusted.
Move up and down by
pushing MENU UP, DOWN
-- 8 OPTION
SHADING
MANUAL
DTL OUT
FLIP
MIRROR
STATUS DISP
FREEZE DISP
OSD OUTPUT
OUTPUT MODE
BAUD RATE
Menu when SHADING MANUAL is selected
(8. 3) Changing detail signal output
Move the " " to DTL OUT by pushing the [MENU UP], [MENU DOWN] buttons.
1
Select either ON (detail signal only is output) or OFF (video signal) by pushing the [DATA UP], [DATA DOWN]
2
buttons.
Select the desired value by
pushing DATA UP, DOWN
--
(FILE A)
OFF
OFF
OFF
OFF
OFF
ON
A
4K
9600bps
[DATA UP]
-128
0
[DATA DOWN]
Select the desired value by
pushing DATA UP, DOWN
--
(FILE A)
MANUAL
0
OFF
OFF
OFF
OFF
ON
A
4K
9600bps
32
SHADING MODE OFF, SET, MANUAL
Detail signal output ON, OFF
Vertical inversion ON, OFF
Horizontal inversion ON, OFF
Inversion mode switching ON, OFF
FREEZE display switching ON, OFF
4K OSD output A, B, C, D
Output mode 4K, 1080p, 1080i
RS-232C baud rate 9600 bps, 19200 bps
127
SHADING MODE OFF, SET, MANUAL
Manual shading correction -128 to 127
Detail signal output ON, OFF
Vertical inversion ON, OFF
Horizontal inversion ON, OFF
Inversion mode switching ON, OFF
FREEZE display switching ON, OFF
4K OSD output A, B, C, D
Output mode 4K, 1080p, 1080i
RS-232C baud rate 9600 bps, 19200 bps