Setting Wmb260(Ac) As Access Point (Ap) - Aztech WMB260AC User Manual

Setting WMB260(AC) as Access Point (AP)

To setup the WMB260(AC) as AP, find an area near the data point or the main
router. Alternatively, you may wish to use an Ethernet cable to connect the
WMB260(AC) to your router for locations that are much further away from the router.
a. Power ON your WMB260(AC) and wait until the Power and Wireless LEDs are
solid Blue.
b. Connect PC/Laptop to the WMB260(AC) through Ethernet.
c. Launch the web browser and access the Web User Interface via
http://10.0.10.254.
d. Set the SSID (Network Name) and Network Password of WMB260(AC). You
may choose to set the SSID and Network Password the same as your main
router's SSID and Network Password.
e. Connect your Data Point/main router to the one of WMB260(AC)'s Ethernet
port using an Ethernet cable.
NOTE:
1. WMB260(AC) can be set up as an AP with any router of any brands.
12