Optional:
Adding WMB260(AC) Mesh Nodes for WMB260(AC) AP
You can add WMB260(AC) mesh nodes to your existing WMB260(AC) AP. To setup a
WMB260(AC) mesh node, ensure that there is an existing WMB260(AC) connected to
your main router via Ethernet as an AP.
To add WMB260(AC) mesh node(s);
1.
Position your mesh node near the WMB260(AC) AP. Power on and wait for the
Power and Wireless LED to turn Solid Blue.
2.
Press the WPS button of the WMB260(AC) AP for 5 seconds.
3.
Press the WPS button of the new mesh node for 5 seconds.
4.
Wait for WPS LED to stop blinking.
5.
Wait for the WPS LED of all the WMB260(AC) units to turn solid BLUE.
6.
You may now move your mesh node.
13