Step 2: Setting Up Your Broadband Connection - Aztech DSL7002GRV(S) Installation Manual

STEP 2: Setting Up Your BroadBand Connection
2.1 Using the
(RJ11), connect the Residential
Gateway's"DSL" Port to the DSL
Microfilter's "DSL" port.
2.2
Insert the head of the DSL
Microfilter into your Telephone
the wall socket.
Note:
You can connect your telephone into the
DSL Microfilter's "Phone" port to use
your fixed Phoneline.
2.3
Connect Power Adapter to your
Residential Gateway "POWER"
port and the nearest electrical
outlet. Turn
at the electrical outlet and the
Residential Gateway
LED Check:
Please wait for approximately 5 minutes.
The "POWER" and the "BROADBAND"
LEDs should now be stable
blinking), except the "ETHERNET" LED,
it should be GREEN and blinking. If not,
please check connections 2.1 to 2.3. Do
NOT proceed to the next section until
you have done so.
Telephone Cable
"On" the power
GREEN (not