Adding More Wmb260(Ac) Mesh Nodes For Air-706P - Aztech WMB260AC User Manual

Adding More WMB260(AC) Mesh Nodes for AIR-706P

You may add additional WMB260(AC) to your mesh system as mesh nodes. This will
help increase the coverage of your wireless range capacity as well as you will be
able to roam without disconnection.
To add additional mesh node(s);
1. Position your mesh node near the AIR router. Power on and wait for the
Power and Wireless LED to turn Solid Blue.
2. Press the WPS button of the AIR router for 5 seconds.
3. Press the WPS button of the new mesh node for 5 seconds.
4. Wait for AON LED to stop blinking.

5. Wait for the AON LED of all the units to turn solid GREEN for the AIR
router and solid BLUE for the mesh nodes.
6. You may now move your mesh node.
7. The whole pairing process takes up to 5 minutes.
NOTE:
1. It is recommended to place your mesh nodes between the AIR router and the place
where dead zone is experienced
2.
The AIR Router can have both WMB260(AC) and another AIR Router as mesh nodes in
one mesh system.
At this point, the AON LED of your AIR router and existing node
will turn blinking red.
11