Cover Meter And Corrosion Functionalities - Proceq Pprofometer 600 Operating Instructions Manual

1. Press the Power On/Off button to power on the touchscreen
2. Access the System menu, then go to Features and Enter activation
key

3. Enter the activation key
2.4

Cover Meter and Corrosion functionalities

A Profometer unit can have both the features of Cover Meter and Corro-
sion Analysis Instrument in the following cases
• Profometer 6 Cover Meter with the upgrade kit to Profometer Corro-
sion (392 50 002)
• Profometer Corrosion with the upgrade kit to Profometer 600 Cover
Meter (392 50 003) plus any possible upgrade to Profometer 630 AI
or 650 AI
In either case the corresponding functionality (Cover Meter and/or Corro-
sion) will be available on the Platform depending on whether the universal
probe or the interface box respectively is initially connected to the unit.
An image on the top of the measuring screen will indicate whether the
universal probe and/or the interface box
When going into the Settings or Explorer menus the user will be prompt-
ed whether to access the Cover Meter or Corrosion corresponding sub-
menus.
The user can disable at any time either feature by going into the System
/ Features menu and unchecking the corresponding box.
© 2017 Proceq SA
 
are connected to the unit.
8