Checking The Package Contents - Kikusui PCR500LE User Manual

Thank you for purchasing the PCR-LE Series AC Power Supply.
The PCR-LE Series is the evolution of Kikusui's proven PCR-LA
Series of AC power supplies. The power supply contains a combi-
nation of a high-speed linear amplifier and an arbitrary waveform
synthesizer to ensure high precision.

Checking the Package Contents

When you receive the product, check that all accessories are in-
cluded and that the accessories have not been damaged during
transportation. If any of the accessories are damaged or missing,
contact your Kikusui agent or distributor. We recommend that you
save all packing materials, in case the product needs to be trans-
ported at a later date.
Accessory
The attached power cord varies depending on the input-voltage-range setting of
the power supply at the time of shipping.
or
Rated voltage: 125 Vac Rated voltage: 250 Vac
PLUG: NEMA5-15 PLUG: CEE7/7
[85-10-1030] [85-AA-0005]
Power cord (1pc.)
This is only included with the PCR500LE.
Setup Guide (1pc.)
CD-ROM (1 pc.)
Quick Reference
(Japanese:1 pc.
English: 1 pc.)
Safety information (1pc.)
PCR-LE series
or
Rated voltage: 250 Vac
PLUG: GB1002
[85-10-0790]
Heavy object warning label
Not included with the PCR500LE
If necessary, attach to the product.
PCR1000LE: A8-900-154
PCR2000LE: A8-900-155
PCR3000LE: A8-900-157
PCR4000LE: A8-900-157
PCR6000LE: A8-900-158
PCR9000LE: A8-900-158
Features
The PCR-LE Series is equipped with the following features.
• Various power supply simulations
Power line abnormalities such as outages and voltage dips can
be simulated. This is a basic feature for power-supply-environ-
ment testing.
• Various measurements
The rms voltage and current, the peak voltage and current, the
active power, apparent power, and power factor of the output
can be measured. Harmonic analysis (up to the 40th harmonic)
can be performed on the output current.
• DC output
The PCR-LE Series can generate DC output and AC + DC out-
put. This makes it possible to use the PCR-LE Series in a wide
variety of fields, including chemistry and physics.
• Sequences
The output voltage, frequency, and waveform can be changed
over time. Power-supply-environment testing can be automated.
In addition to the AC output sequences, DC output and AC + DC
output sequences are also available. A variety of standard tests
can also be performed.
• Sensing and regulation adjustment
Even if the load device is at a remote location, the PCR-LE Series
can stabilize the voltage across the load by correcting for volt-
age drops.
There are two types of sensing: hard sensing and soft sensing.
The different types of sensing are used depending on the load
conditions and how you will use the PCR-LE Series.
• Output current control
The output limit function can be used to limit the output current
(rms) to a fixed value to perform continuous operation. Continuity
tests on electrical equipment (such as switchboards, breakers,
and wiring devices) can be performed under stable conditions.
• Power management function (power saving function)
A sleep function, which turns the power units off to reduce power
consumption when output is not generated for the specified
length of time, and a power-saving function, which operates the
power units at the bare minimum settings as required by the sup-
ply load, are available.
• Memory function
Up to 99 entries of output frequency, voltage (AC or DC), and
waveform bank settings can be saved to the internal memory.
The contents of internal memory, panel settings, power line ab-
normality simulations, sequence data, and waveform bank data
can be saved to a USB memory device.
• External communications
The PCR-LE Series can be controlled remotely through its
RS232C interface. If an optional interface board is used, the
PCR-LE Series can be controlled remotely through USB, GPIB,
and LAN interfaces.
• Single-phase, three-wire output/ Theree-phase output (Optional)
Use of the optional 2P05-PCR-LE allows the outputs of two PCR-
LEs to be connected in series for use as single-phase, three-wire
system power supplies. Use of the optional 3P05-PCR-LE allows
the outputs of three PCR-LEs to be connected in star connection
for use as three-phase system power supplies
• Master-Slave parallel control (Optional)
The PD05M-PCR-LE/PD05S-PCR-LE option enables the PCR-LE
Series to be operated in parallel (except for the PCR500LE and
PCR1000LE; up to five units or within 27 kVA of power; different
models can be mixed).
• External analog signal control (optional)
The EX05-PCR-LE/EX06-PCR-LE option enables you to control
the PCR-LE2 Series output using external analog signals.
.
3