Checking The Package Contents - Kikusui PAT20-200T User Manual

Thank you for purchasing the PAT-T Series Regulated DC
Power Supply.
The PAT is a low-noise, highly efficient Constant Voltage (CV)/
Constant Current (CC) automatic crossover power supply that
employs a software switching system.
Notations Used in This Manual
• In this manual, the PAT-T Series regulated DC power supply
is often simply referred to as "the PAT."
• The word "PC" used in this manual is a generic term for
personal computers and workstations.
• The following marks are used with the explanations in this
manual.
WARNING
Indicates a potentially hazardous situation which, if
ignored, could result in death or serious injury.
CAUTION
Indicates a potentially hazardous situation which, if
ignored, could result in death or serious injury.Indicates a
potentially hazardous situation which, if ignored, may
result in damage to the product and other property.
Indicates information that you should know.
See
Indicates reference to detailed information.
Indicates reference to detailed information product
manual (CD-ROM).
Indicates reference to detailed information product
manual.
SHIFT+key name (marked in blue)
Indicates an operation in which a switch marked in blue is
pressed while holding down the SHIFT key.
CFxx : x
The first two characters "CF" indicates a configuration set-
ting, and the next two-digit number indicates the CONFIG
parameter number. The character after the colon indicates
the selected setting.
Indicates a feature or specification that is only
available on the 4 kW type.
8kW
Indicates a feature or specification that is only
available on the 8 kW type.
Memo Indicates useful info rmation.
Applicable firmware version of the PAT-T Series
This manual applies to 8 kW type products with firmware ver-
sion 5.xx and 4 kW type products with firmware version 4.xx.
When making an inquiry about the product, please provide us
with the following information.
• Model (indicated at the top section on the front panel)
• Firmware version
• Serial number (indicated at the bottom section on the rear
panel)
This product information can also be obtained using the *IDN?
remote control command.
Trademarks
Microsoft and Windows are registered trademarks of Microsoft
Corporation in the United States and/or other countries.
Other company names and product names used in this man-
ual are generally trademarks or registered trademarks of the
respective companies.
Copyright
Reproduction and reprinting of this operation manual, whole or
partially, without our permission is prohibited.
Both unit specifications and manual contents are subject to
change without notice.
© 2010 Kikusui Electronics Corporation

Checking the Package Contents

When you receive the product, check that all accessories are
included and that the unit and accessories have not been
damaged during transportation.
If any of the accessories are damaged or missing, contact
your Kikusui agent or distributor.
We recommend that all packing materials be saved, in case
the product needs to be transported at a later date.
Accessories
OUTPUT terminal cover set
(Output protection covers, Screws)
Terminal block cover
(Terminal block cover, screws) [Only 4 kW type]
Output PAT20-400T/ PAT30-266T
terminal bolt
PAT20-200T/ PAT40-100T/
(Bolts, Nuts,
PAT60-67T/ PAT160-25T
Spring washers)
PAT40-200T/ PAT60-133T/
PAT80-100T/ PAT160-50T
PAT250-32T/ PAT350-22.8T/
PAT500-16T/ PAT650-12.3T/
PAT850-9.4T
J1/ J2 connector kit
(Protection covers, sockets, pins)
Chassis connection wire set
(Chassis connection wire, screw)
Heavy object warning label
Setup guide
Quick reference
Safety information
CD-ROM
2 sets
1 set
M12 (2 sets)
M10 (2 sets)
M8 (2 sets)
1 set
1 set
1 pc.
1 pc.
1 pc.
(English)
1 pc.
(Japanese)
1 pc.
1 pc.