Table of Contents
Advertisement
Synchronization" button. The "Manual Date & Time" panel allows the user to set date and time.
(5) Administrator's E-mail Address
In this panel, administrator records one's e-mail address. If administrator put a 'contact' menu of e-mail
communication on real time image viewer page, the linked e-mail address to the 'contact' menu is to be
synchronized with this. So administrator can keep up e-mail address easily.
(6) Initialize Flash Info
This will initialize almost all the information saved on Flash Memory. However Date & Time, Model, Serial
Number, and IP configuration of "System Configuration", and Video Signal Type of "Video Configuration"
menus will not be changed.
(7) Rebooting
If Webthru has any problems, administrator can reboot it without adjusting power supply. This button works
as on/off switch.
2) User Configuration
This page is to configure IDs and
passwords of an administrator and 5
users.
(1) User Account
There
are
one
account and 5 users' accounts.
Account name can be changed.
(2) Password
If you want to open your Webthru to everyone, you may not change default user's ID and password. However
you should change administrator's ID and password as unique ones.
(3) Access Rights
Administrator may give or take users' right of PTZ control and video control. With default setting,
administrator has both right of PTZ control and video control and normal user doesn't have any right.
•
Video control: This is to control pop-up menus such as image quality level and QBOX settings.
•
PTZ control: This is to control 'Focus Sensitivity' in pop-up menu and to control PTZ mechanism of a
CCTV camera.
3) Network Configuration
This page is to define network type and set network addresses of Webthru.
(1) DHCP Client Protocol
DHCP (Dynamic Host Configuration Protocol) is to manage host address on a network. With this protocol,
every host on a LAN may share limited official IP address for Internet access. In other words, every host on a
LAN may lease official IP address from DHCP server temporarily.
(2) Select Network Interface
This is to select proper network interface with which Webthru is connected.
administrator's
20
Webthru SWC 306 User's Guide
Advertisement
Table of Contents
