Table of Contents
Advertisement
The Marathon Series features a maintenance-free, brushless
motor, and an easy-to-use front panel, which provides three
versatile timing modes: automatic timed run, short spin
(momentary), and hold (continuous mode). Acceleration
and brake rates may be controlled, to optimize runs: rapid
for fast separations or slow for delicate samples. Repeat
runs, with the same speed and time settings, may be
achieved at the touch of a key.
A fail-safe cover interlock insures that the cover is closed,
before a run can begin, and keeps the cover closed, until the
rotor has reached a safe low speed (below 100 rpm), even
in the event of a power failure.
The rugged steel cabinet and rigid construction provide
quiet operation and long term reliability.
1.2
About This Manual
The Operations Manual contains all of the information
needed to install, operate, and maintain a Marathon Series
centrifuge. Refrigerated and ventilated models operate
similarly, and any differences are highlighted and noted,
throughout this manual. This manual, also, contains speed
and force, derating, chemical resistance, and
decontamination tables. The last chapter lists the units'
specifications.
This manual is written for centrifuge operators. In addition
to operation information, it contains a few basic
troubleshooting techniques, and a chapter on maintenance.
This Operation Manual is not a guide for servicing
centrifuge units.
MARATHON Series Operation Manual
5
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Hide quick links:
Advertisement
Table of Contents
