IDEAL Vogue System Gen 2 S15 Installation And Servicing page 9

Table of Contents

Advertisement

VOGUE SYSTEM GEN2
Natural Gas only
Boiler size
G.C. Appliance No.
(Benchmark No.)
S15
41-750-88
S18
41-750-89
S26
41-750-90
S32
41-750-91
Destination Country:
GB, IE
For GB, to comply with Building Regulations Part L1 (Part 6 in Scotland) the boiler should be fitted in accordance with the
manufacturer's instructions. Self-certification that the boiler has been installed to comply with Building Regulations can be
demonstrated by completing and signing the Benchmark Commissioning Checklist.
Before installing this boiler, read the Code of Practice sheet at the rear of this book.
B
oiler
Make and model ......................................................... 9
Appliance serial no. on data badge .......... Front Cover
SEDBUK No. % .......................................................... 8
Controls
Time and temperature control to heating ................. 31
Time and temperature control to hot water ............ n/a
Heating zone valves ................................................ n/a
TRV's........................................................................ 12
Auto bypass ............................................................. 12
Boiler interlock .......................................................... 12
For .................................................................... all boilers
Flushing to BS 7593 ................................................. 15
Inhibitor .................................................................... 15
Central heating mode
Heat input ...................................................to be calculated
NOTE TO THE INSTALLER: COMPLETE
THE BENCHMARK COMMISSIONING
CHECKLIST AND LEAVE THESE
INSTRUCTIONS WITH APPLIANCE
Installation and Servicing
SECTION 1 - GENERAL
PI No.
86 CR 30
86 CR 30
86 CR 30
86 CR 30
BENCHMARK COMMISSIONING CHECKLIST DETAILS
Page
Burner operating pressure ...................................... n/a
Central heating flow temp. ...........measure and record
Central heating return temp. ........measure and record
For combination boilers only
Scale reducer .......................................................... n/a
Hot water mode
Heat input ............................................to be calculated
Max. operating burner pressure .............................. n/a
Max. operating water pressure ........ measure & record
Cold water inlet temp ...................... measure & record
Hot water outlet temp. ..................... measure & record
Water flow rate at max. setting ........ measure & record
For condensing boilers only
Condensate drain ................................................24-25
For all boilers:
complete, sign & hand over to customer
For assistance see Technical Helpline on the back page
Page
9

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents