Saveimgprof - Canon WUX450 User Commands

SAVEIMGPROF

User memory creation/storage/deletion -- user memory creation status
Format
Setting Command
Response
Reference Command
Response
< User memory save to parameter:ID >
Parameter
USER_1
USER_2
USER_3
USER_4
USER_5
DEL_ALL
< User memory presence parameter:ID >
Parameter
0
1
Environment
Power mode restriction
LAN
SL0 SL1 SL3 ON
No No No Yes
Example
Setting
> SAVEIMGPROF=USER_2
< i:OK
Reference
> GET=SAVEIMGPROF
< g:SAVEIMGPROF=5:0,1,1,0,0
* Commands are indicated by ">", and responses are indicated by "<".
WUX450 / WX520 / WUX400ST / WX450ST User Commands
SAVEIMGPROF=<User memory save to parameter:ID>
i:OK
GET=SAVEIMGPROF
g:SAVEIMGPROF=<Number of user memories>:<User 1 present
parameter>,<User 2 present parameter>,<User 3 present parameter>,<User 4
present parameter>,<User 5 present parameter>'
Note: See "Error list" for any response other than the above.
Meaning
Save to User 1
Save to User 2
Save to User 3
Save to User 4
Save to User 5
Delete all User memory
Meaning
User memory not created
User memory created
RS-232C
ST ON D-RGB A-RGB COMP
No Yes Yes Yes
- 52 -
Input
HDMI LAN USB
Yes Yes Yes Yes
None
Yes