Vecow ECS-9740-505M-GTX1050 User Manual page 99

Return:
TRUE (1): Success;
FALSE (0): Fail (Initial error, or call by pointer error, or hardware
problem)
BOOL SetPOEConfig(BYTE Auto, BYTE Mask)
Set POE configuration
Auto ([3:0]): Auto mode, pin setting by hexadecimal bitmask
Mask ([3:0]): DC Enable / Disable, pin setting by hexadecimal bitmask
Return:
TRUE (1): Success;
FALSE (0): Fail (Initial error, or out of range error, or hardware problem)
BOOL GetPOE(BYTE *POE)
Get POE input
POE ([3:0]): POE state, pin setting by hexadecimal bitmask
Return:
TRUE (1): Success;
FALSE (0): Fail (Initial error, or call by pointer error, or hardware
problem)
BOOL SetPOE(BYTE POE)
Set POE output
POE ([3:0]): POE state, pin setting by hexadecimal bitmask
Return:
TRUE (1): Success;
FALSE (0): Fail (Initial error, or out of range error, or hardware problem)
©Vecow ECS-9700/ 9600 GTX1050 User Manual
1: Enable; 0: Disable
1: Auto; 0: Manual
1: Enable; 0: Disable
1: On; 0: Off
1: On; 0: Off
Appendix B
92