4.3.3 AMT Configuration
Figure 4 3-3: Intel AMT Settings
Intel AMT
Enables/disables Intel (R) Active Management Technology BIOS extension.
Note: iAMT H/W is always enabled. This option just controls the BIOS extension
execution. If enabled, this requires additional firmware in the SPI device.
4.3.4 PCH-FW Configuration
Figure 4 3-4: PCH-FW Settings
ME Unconfig on RTC Clear State
Disabling this option will cause ME not to unconfigure on RTC clear.
ME State
Set ME to Soft temporarily disabled.
4.3.5 SMART Settings
Figure 4 3-5: SMART Settings
SMART Self Test
Run SMART self test on all HDDs during POST.
©Vecow ECS-9700/ 9600 GTX1050 User Manual
BIOS AND DRIVER SETTING
66