APRILIA DORSODURO FACTORY ABS 2011 Service Station Manual page 306

Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys.
Chassis
LUBRICATE THE CHAIN ON A REGULAR BASIS, PARTICULARLY IF YOU DETECT DRY OR
RUSTY PARTS.
FLATTENED OR JAMMED CHAIN LINKS SHOULD BE LUBRICATED AND GOOD OPERATING
CONDITIONS RESTORED.
THE GEARING CHAIN HAS SEALING RINGS AMONG THE LINKS THAT KEEP THE GREASE
INSIDE.
ADJUST, LUBRICATE, WASH AND REPLACE THE CHAIN WITH UTMOST CAUTION.
CLEANING AND LUBRICATION
Do not wash the chain with water jets, steam jets, high-pressure water jets and highly flammable sol-
vents.
•
Wash the chain with fuel oil or kerosene. Maintenance operations should be more frequent
if there are signs of quick rust.
Lubricate the chain at the intervals specified on the routine maintenance table and whenever necessary.
•
Wash the chain, allow to dry and lubricate with spray grease for sealed chains.
Stand
pos. Description
1 Stand screw
2 Thin nut
3 Spring fixing pin
4 TCEI screw fastening stand switch
CHAS - 306
email: info@motomatrix.co.uk
DORSODURO FACTORY ABS
S
TAND ASSEMBLY
Type Quantity
M10x1.25 1 10 Nm (7.37 lbf ft)
M10x1.25 1 30 Nm (22.13 lbf ft)
- 1 7.5 Nm (5.53 lbf ft)
M5x16 2
Torque Notes
Loctite 243
Loctite 243
7 Nm (5.16 lbf ft)
-
-