APRILIA DORSODURO FACTORY ABS 2011 Service Station Manual page 112

Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys.
Electrical system
DSB 06 - -
Error cause
•
An oil sensor fault is signalled when it is detected that the sensor circuit is open or shorted
to positive.
DSB 07 - Oil pressure sensor
Error cause
An oil sensor fault is signalled when, with engine off, it is detected that the sensor circuit is open.
Troubleshooting
The test is performed only once when the key is set to ON. This error is signalled by the bulb icon, and
the general warning light turns on as well.
DSB 08 - Oil pressure sensor
Error cause
An oil sensor fault is signalled when, with engine running, it is detected that the sensor circuit is closed.
There is an error when the general warning light turns on.
Troubleshooting
This error is signalled by the bulb icon, and the general warning light turns on as well.
The instrument panel must keep all previous errors stored in its memory.
DELETE ERRORS
This option deletes all instrument panel errors; a further confirmation is requested. Use Navigator to
reset ECU errors.
VEHICLE SERVICING RESET
This function is used to reset vehicle servicing. Using this function, the odometer can be reset only once
within the first 200 km (124 mi) of the vehicle, provided this has not been done by the Quality Check.
UPDATE
This function is used to program the instrument panel again. This screen page shows the software
version currently loaded; the LCD reads:
•
INSTRUMENT PANEL DISCONNECTED. NOW CONNECT THE DIAGNOSIS INSTRU-
MENT.
The instrument panel will restart to work normally after the key is inserted-extracted.
Modify Keys
With this function the instrument panel can update the keys. Up to 4 keys can be stored.
The user code is first requested to be entered:
•
ENTER THE CODE
After entering the correct code, the following message should be shown on the display:
•
INSERT THE X KEY
•
INSERT THE X+1 KEY
ELE SYS - 112
email: info@motomatrix.co.uk
DORSODURO FACTORY ABS