APRILIA DORSODURO FACTORY ABS 2011 Service Station Manual page 221

Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys.
DORSODURO FACTORY ABS
•
Remove the camshaft, lock it on a vice
with aluminium jaws, then tighten it to
the prescribed torque.
DO NOT TIGHTEN THE CAMSHAFT GEAR NUT TO THE
ULTIMATE TIGHTENING TORQUE WITH THE SHAFT
MOUNTED ON THE CYLINDER.
THIS OPERATION WOULD IRRETRIEVABLY DAMAGE
THE HEAD .
Locking torques (N*m)
Nut fixing camshaft gears - M15x1 (4)
(66.38 lbf ft)
•
Remove the gear alignment tool.
Specific tooling
020718Y Camshaft gear alignment pin
•
Release the crankshaft from the specific special tool.
•
Rotate the crankshaft in the riding direction until the rear cylinder piston reaches the top
dead centre.
•
Lock the crankshaft with the specific special tool.
•
Carry out the timing operations performed for the front cylinder.
Specific tooling
020720Y Timing tool
Cylinder-piston assembly
email: info@motomatrix.co.uk
90 Nm
Engine
ENG - 221