APRILIA DORSODURO FACTORY ABS 2011 Service Station Manual page 229

Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys.
DORSODURO FACTORY ABS
DISTRIBUTE Loctite 270 (high-strength) ON THE THREAD AND SCREW THE STUD BOLT ON
THE CRANKCASE UNTIL THEY PROTRUDE BY 137 mm (5.39 in), THEN MAKE SURE THE Loctite
HAS SET.
•
Insert a new cylinder base gasket, it
should be as thick as the gasket previ-
ously removed: 0.40 - 0.50 - 0.60 mm
(0.0157 - 0.0197 - 0.0236 in).
•
The silicone side should be facing the
crankcase.
CAUTION
IF THE ORIGINAL GASKET THICKNESS CANNOT BE
CHECKED OR SHOULD THE CYLINDER BE REPLACED,
REFER TO THE "BASE GASKET SELECTION" SECTION.
•
Before fitting the cylinder, place the
chain sliders and the timing chain on
the crankshaft; fit the timing chain on
the crankshaft from the base side.
NOTE
BEFORE FITTING THE CYLINDER, CAREFULLY BLOW
AIR INTO THE LUBRICATION DUCT AND LUBRICATE THE
CYLINDER LINER.
•
Insert the cylinder-head unit on the
stud bolts.
•
Working in a diagonal sequence and in
stages, screw the four nuts once the
stud bolt threads have been greased.
•
Screw the screw located outside the
cylinder.
email: info@motomatrix.co.uk
Engine
ENG - 229