Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys.
DORSODURO FACTORY ABS
•
Finish the nut tightening to the indica-
ted tightening torque.
pos.
2
Headstock nut - pre-tightening
2
Headstock nut
3
Stainless steel TCC screw fastening
stanchions to upper and lower yokes
When refitting the U-bolt, position the two referen-
ces facing the front part of the vehicle.
Assembling
•
Grease the lower and upper bearing
rollers
•
Prefit the shim, dust gaiter and lower
bearing on the steering yoke as shown
in the figure.
Recommended products
AGIP MP GREASE Grease for bearings, joints,
couplings and linkages
As an alternative to the recommended product,
use top brand grease for roller bearings with an
operating temperature range of -22°F to +284°F
(-30°C to +140°C), drop point between 302ºF to
446°F (150°C to 230°C), high corrosion protection
qualities and good water and rust resistance.
email: info@motomatrix.co.uk
S
TEERING UPPER PLATE
Description
Type
Quantity
M22x1
1
10 Nm (7.37 lbf ft)
M22x1
1
25 Nm (18.44 lbf ft)
M8x30
6
25 Nm (18.44 lbf ft)
Suspensions
Torque
Notes
Loctite 243
Loctite 243
-
SUSP - 293