Installing A So-Dimm Memory Module - Nexcom NDiS V1100 User Manual

Chapter 3: System Setup

Installing a SO-DIMM Memory Module

1. Locate two SO-DIMM sockets on the TOP side and back side of the board.
Copyright © 2022 NEXCOM International Co., Ltd. All Rights Reserved.
2. Insert the module into the socket at a 30-degree angle. Then push
the module down until the clips on both sides of the socket lock into
position. You will hear a distinctive "click" sound, indicating the module
is correctly locked into position.
SO-DIMM
28
NDiS V1100 User Manual