Engine And Engine Oil Indicator Lights; Malfunctions (Display Element/Multifunctional Display) - Wacker Neuson DW100 Operator's Manual

8 Malfunctions
8.2

Engine and engine oil indicator lights

Engine Engine
warning stop
Yellow Red
On On
Off Off
On On
Off Off
On Off
Flashes On
8.3

Malfunctions (display element/multifunctional display)

Symbol
Display element
Red
8-2
Oil pres-
Description
sure
Red
All warning and indicator lights illuminate for a few seconds if the starting key
is turned to position 1.
On
If the engine stop or oil pressure light does not illuminate, stop machine oper-
ation immediately and contact a Wacker Neuson service center.
Off No malfunction.
Low oil pressure (if the oil pressure indicator light illuminates during opera-
tion). Check the oil level and add oil if necessary
On engine oil" on page
If the malfunction is still indicated, stop the engine and contact a Wacker Neu-
son service center.
The engine oil and engine oil filter replacements are due within the next 20
Flashes
operating hours.
Flashes The engine oil has reached the total operation time.
The engine oil has exceeded the total operation time. Contact a Wacker Neu-
Flashes son service center. The engine performance is reduced since the mainte-
nance interval is exceeded.
Description
Multifunc-
tional display
--
Buzzer sounds.
Dirty air filter.
Contact a Wacker Neuson service center.
The battery is no longer charged.
Possible alternator or V-belt malfunction.
Note: Increase the engine speed. The electrical system is in
working order if the charge indicator light goes out after about
one minute.
If the malfunction is still indicated, stop the engine immediately
and contact a Wacker Neuson service center.
7-27.
– see chapter " Adding
See
BA D18 us* 1.1 * D18b800.fm
7-32
--