Cpu - Hitachi VisionBase 8880R Product Manual

Ch 1: Hardware

CPU

This chapter describes the CPU baseboard and shows how to set the jumpers. Note: CPUs need to be installed with
VRMs (Voltage Regulator Module).
Each CPU is numbered and corresponds to a numbered VRM. Install the CPUs in the order shown below in
Figure 14 CPU/VRM Installation Detail. Note: This detail is for one CPU installed, minimal configuration.
14
Memory Termination Cards
(Option Memory Slot #3, 4)
Figure 13 Memory and CPU Slots
VRM #3
VRM #2
VRM #1
VRM #5
VRM #6
VRM #7
Figure 14 CPU/VRM Installation Detail
Processor slot #4
Processor slot #3
Processor slot #2
Processor slot #1
Processor slot #5
Processor slot #6
Processor slot #7
Processor slot #8
Memory Expansion board #1
(Memory slot x 32)
Memory Expansion board #2
(Memory slot x 32)
Processor Slot #4
VRM #4
Processor Slot #3
Processor Slot #2
Processor Slot #1
Processor Slot #54
Processor Slot #6
Processor Slot #7
VRM #8
Processor Slot #8
= Default VRM
setting
Hitachi VisionBase 8880R Server