Backup For Icu Disk; Flow Of Operation With The Icu - Hitachi VisionBase 8880R Product Manual

Backup for ICU Disk

The ICU consists of two floppy disks. Create backup copies of these floppy disks. Carefully store the original disks.
•
ISA Configuration Utility DISK1
•
ISA Configuration Utility DISK2
For how to create backup disks, see the manual for your OS. For example, in DOS, you can use the DISKCOPY
command.
Some improper operation can make ICU floppy disks unusable. In such a case, create new backup
disks before using the existing backup disks.

Flow of Operation with the ICU

The flow of operation witht the ICU is as follows:
Built-in devices must be added or exchanged by maintenance personnel only. Be sure to avoid
removing the cover and installing/removing built-in devices. Otherwise, operation of the equipment
shall not be guaranteed.
Hitachi VisionBase 8880R Server
Start the ICU
Main window
Exit the ICU
Turn off the system
equipment
Change settings
in short pins
on the ISA board
Install the ISA board
in the expansion slot
of the system equipment
Check resource usage status
Add an ISA board
Change an ISA board
Legend:
Mandatory for installing/
removing ISA board
Optional
Ch 2: System Environment Setting
37