Hitachi VisionBase 8880R Product Manual page 43

ICU Screen
When the ICU is started, the [ISA Configuration Utility] window is displayed as shown below.
Title bar
1.
Displays the title.
Menu bar
2.
Choosing each menu (portion with characters) will display its menu list. By choosing an item on the menu list,
you can execute one of the ICU functions.
Button bar
3.
Choosing each button (portion with characters) will display its dialog box. There are four buttons on the button
bar.
Operating the ICU
You operate the ICU from the keyboard. You use the following keys during operation:
Key
Alt
+ letter
Tab
←
↑ ↓
, , ,
Enter
How to Use Help
You can use the Help function when you are not sure how to operate.
•
Choose [Contents] on the [Help] menu. Choose a topic you want, and choose [Help].
•
You can also display Help for the command currently being executed. Choosing [Help] in the dialog box will
display explanations .
Hitachi VisionBase 8880R Server
File Configure View Advanced Help
Add Remove Modify
Card Configured In System:
Motherboard System Devices
PCI Card: VGA Controller
PCI Card: SCSI Controller
PCI Card: Unknown Card
PCI Card: IDE Controller
Figure 25 ICU Screen
When you want to choose a button with an underlined letter, you can substitute it by entering
that letter while holding down
choosing Save, you can enter
When you move to another control button or to a list box, use
Shift
holding down
→
To move the cursor, use these keys.
To choose the item on which the cursor is located currently, press this key.
ISA Configuration Utility
View
Function
Alt
key. For example, instead of opening the File Menu and
F
while holding down
key, you move in an opposite direction.
Ch 2: System Environment Setting
Alt
key, and then enter
Tab
key. Pressing Tab while
S
.
39