Adding An Extended Board - Hitachi VisionBase 8880R Product Manual

Ch 2: System Environment Setting
Checking Resources for Extended Boards
In the [ISA Configuration Utility] window, select the extended boards to be checked.
1.
Choose the [View] button.
2.
The [Card Resource Usage] dialog box is displayed as shown below. In this dialog box, you can check the usage
status of extended boards.
To terminate processing, choose [Close].
3.

Adding an Extended Board

To install an extended board, make ICU settings in the following steps. The following example uses a
communication board (PC-CH2100).
Start the ICU.
1.
In the [ISA Configuration Utility] window, choose the [Add] button.
2.
42
ISA Configuration Utility
File Configure View Advanced Help
Add Remove Modify View
Card Configured In System:
Motherboard System Devices
PCI Card: VGA Controller
PCI Card: SCSI Controller
PCI Card: Unknown Card
PCI Card: IDE Controller
System Resource Usage
[ ]
Resources assigned to:
Motherboard System Devices
IRQ: DMA:
0 2
1 4
2(9)
Close
ISA Configuration Utility
File Configure View Advanced Help
Add Remove Modify View
Card Configured In System:
Motherboard System Devices
PCI Card: VGA Controller
PCI Card: SCSI Controller
PCI Card: Unknown Card
PCI Card: IDE Controller
Memory [hex]: I/O Port [hex]:
0 - 9ffff 0 - f
e0000 - fffff 20 - 21
100000 - 1ffffff 2e - 2f
Print To File... Help
Hitachi VisionBase 8880R Server