Extension); Network-Wide Diagnostics - Microwave Data Systems MDS TransNET 900 Installation & Operation Manual

Table 8. Operating Status—Display Only (Continued)
Command
RTU
Details page 35
SAF
Details page 35
SER
Details page 36
SHOW PWR
Details page 36
SHOW SYNC
Details page 36
SKIP
Details page 36
SLEEP
Details page 37
SREV
Details page 37
STAT
Details page 37
TEMP
Details page 37
UNIT
Details page 37
XADDR
Details page 38
XPRI
Details page 38
XMAP
Details page 38
XRSSI
Details page 38
26 MDS TransNET 900 I&O Guide
Description
RTU simulator's operational status (ON/OFF)
Store-and-forward mode status in this unit.
(ON/OFF)
Serial number of radio
RF output power. Measured RF power in dBm
Information on synchronization source and
depth
Frequency zones that are skipped
Radio's Sleep Mode setting.
(At Remotes Only)
Transceiver firmware revision level
Current alarm status
Transceiver's internal temperature (°C)
Programmed unit address for

network-wide diagnostics

This unit's Extended address
Address of the primary Extended radio unit

(Extension).

Included Extended units in MODE X. (Exten-
sions and Remotes only).
Minimum RSSI level required to preserve syn-
chronization with a non-primary radio. (Only
meaningful when XPRI is not NONE)
MDS 05-2708A01, Rev. B