Control Board - Elation EPV762 MH User Manual

11. Control Board

There are four keys on the control panel , which could be used to set the address, turn
ON/OFF, operating the program and reset.
[Mode/Esc] press this key to enter into edit mode. Press this key under the edit mode if
you want to return to previous menu. it will exit from edit mode 60 seconds after the last
keypress
[UP] screen will flash when pressing this key in normal mode, the adress value
will increasing. Keep pressing this key, the address value will increase rapidly. it will exit
from flash 60 seconds after the last keypress. Press this key under edit mode, you can
choose the function you want from the buttom up in the menu.
[DOWN] screen will flash when pressing this key in normal mode, the adress value
will idecreasing. Keep pressing this key, the address value will decrease rapidly. it will exit
from flash 60 seconds after the last keypress. Press this key under edit mode, you can
choose the function you want from the top down in the menu.
[ENTER] this key is functionless when in normal mode. Press this key under the edit
mode, it will enter into next menu.
Set Dmx Address Set Dmx Address Set Dmx Address
Func
Value Display Value Display Value Display
tion
Set To Slave Set To Slave Set To Slave
Mod
Auto Program Auto Program Auto Program
e
Music Control Music Control Music Control
Time Information Current Time Time Information
Info Info
rmat rmat
ion ion
Software Version Software Version
Status Settings
Pers Pers Pers Pers
onali onali onali onali
ty ty ty ty
Display Setting
Initial Effect
Reset Default
Effe Calibrate Values --Password--
ct
Adju
st
Rese Reset All
t Reset Pan&Tilt
Func
tion
A001~AXXX A001~AXXX A001~AXXX A001~AXXX A001~AXXX
PAN...... PAN...... PAN...... PAN...... PAN......
Slave1,Slave2,Slave3 Slave1,Slave2,Slave3 Slave1,Slave2,Slave3 Slave1,Slave2,Slave3 Slave1,Slave2,Slave3
Master / Alone Master / Alone Master / Alone Master / Alone Master / Alone
Master / Alone Master / Alone Master / Alone Master / Alone Master / Alone
Current Time Current Time Current Time
Total Run Time Total Run Time Total Run Time Total Run Time
Clear Total Time Clear Total Time Clear Total Time Clear Total Time
Ver1.0 Ver1.0 Ver1.0 Ver1.0 Ver1.0 Ver1.0
Address via DMX Address via DMX Address via DMX Address via DMX Address via DMX
No DMX Status No DMX Status No DMX Status No DMX Status No DMX Status
Pan Reverse Pan Reverse Pan Reverse Pan Reverse Pan Reverse
Fine Resolution Fine Resolution Fine Resolution Fine Resolution Fine Resolution
Feedback Feedback Feedback Feedback Feedback
Movement Speed Movement Speed Movement Speed Movement Speed Movement Speed
Mic Sensitivity Mic Sensitivity Mic Sensitivity Mic Sensitivity Mic Sensitivity
Shutoff Time Shutoff Time Shutoff Time Shutoff Time Shutoff Time Shutoff Time Shutoff Time
PAN PAN PAN PAN
: : : :
ON/OFF ON/OFF ON/OFF ON/OFF ON/OFF ON/OFF ON/OFF
--Password-- --Password-- --Password--
PAN: PAN: PAN: PAN:
XXXX(Hours) XXXX(Hours)
XXXX(Hours) XXXX(Hours)
ON/OFF ON/OFF
ON/OFF ON/OFF
Initial/Hold/Auto/Music Initial/Hold/Auto/Music
ON/OFF ON/OFF
ON/OFF ON/OFF
ON/OFF ON/OFF
Speed 1~ 4 Speed 1~ 4
70%, 0~99% 70%, 0~99%
PAN =XXX PAN =XXX PAN =XXX
: : :
Password=XXX Password=XXX Password=XXX
PAN =XXX: PAN =XXX: PAN =XXX:
8
DMX address setting
DMX value display
Slave setting
Auto program
Music control
Power on running time
Fixture running time
Clear Fixture running tim
Software version of each IC
Add. via DMX
Auto run if no DMX
Pan Reverse movement
Fine resolution switch
Movement Feedback switch
Movement Mode Select
Sensitivity of Mic.
Display shutoff time
Initial effect position
Restore factory sett.
Calbrate and adjust the
effects to standard/right
position Password "050"
Reset all motors
Reset Pan