General Guidelines - Elation EPV762 MH User Manual

This LED CURTAIN has left the factory in perfect condition. In order to maintain this
condition and to ensure a safe operation, it is absolutely necessary for the user to follow
the safety instructions and warning notes written in this user manual.
 If the LED CURTAIN has been exposed to temperature changes due to environmental
changes, do not switch it on immediately. The arising condensation could damage the
LED CURTAIN. Leave the device switched off until it has reached room temperature.
 Make sure operation after every piece of LED connected properly.
 Make sure that the available voltage is not higher than stated at the end of this
manual.
 Make sure the power cord is never crimped or damaged by sharp edges. If this would
be the case, replacement of the cable must be done by an authorized dealer.
 Always disconnect from the mains, when the device is not in use or before cleaning it.
Only handle the power cord by the plug. Never pull out the plug by tugging the power
cord.
 Please be aware that damages caused by manual modifications to the device are not
subject to warranty. Keep away from children and non-professionals.
 If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively
replaced by the manufacturer or his service agent or a similar qualified person in order
to avoid a hazard.
5．2 GENERAL GUIDELINES
 This device is a lighting effect for professional use on stages, in discotheques,
theatres, exposition, etc.
 This fixture is only allowed to be operated with the max alternating current which
stated in the technical specifications in the last page of this manual
 Lay the LED screen carefully, avoid the heavy pressure on LEDs.
 Fixtures cannot be installed on combustible substances, keep more than 50cm
distance with wall for smooth air flow, so there should be no shelter for fans and
ventilation for heat radiation.
 Always fix the fixture with an appropriate safety cable if you use the quick lock cam in
hanging up the fixture, please make sure the 4 quick lock fasteners turned in the
quick lock holes correctly.
 While choosing the installation-spot, please make sure that the device is not exposed
to extreme heat, moisture or dust.
 When fixing the device on a raised-from-the- ground support, be sure to insert quick-
lock detain in the pre-arranged screw holes, and fix the device with an accessorial
safety cable.
 Operate the device only after having familiarized with its functions. Do not permit
operation by persons not qualified for operating the device. Most damages are the
result of unprofessional operation.
 Please use the original packaging if the device is to be transported.
 For safety reasons, please be aware that device teardown are forbidden.
 If this device will be operated in any way different to the one described in this manual,
the product may suffer damages and the guarantee becomes void.
4