Table of Contents
Advertisement
monitoring devices detect.
29.3 Open Brightness control repertoire
Click the <Setting> in the menu and select <Brightness control repertoire> as Fig. 18-3
shows, the interface < Brightness control repertoire > pop up as Fig. 18-4 shows.
Fig. 18-3
29.4 Delete brightness control repertoire
Select what brightness orders needing to edit in the automatic brightness control
repertoire, click the button <Delete>; or the button<Delete All> to remove all orders
needed.
29.5 Restore fault brightness control repertoire
Software has its own default brightness control orders; click the button < Default > can
display the default value of this brightness.
Click the button <Exit> to finish settings.
30. Software Setting
30.1 Set basic properties of software
Click the <Setting> in the menu and select <Software Settings> as Fig. 19-1 shows; the
interface < Software Settings> pops up as Fig. 19-2 shows.
Fig.19-1
57
Advertisement
Table of Contents
