Network Settings; Advanced Network Settings; Vlan; Https - RCA IP120 Manual

Network Settings

Please refer to chapter "Configuration and Registration" for the Basic Network WAN
setting information. In the next paragraphs we will describe other Network related
settings.

Advanced Network Settings

VLAN

VLAN is a group of hosts with a common set of requirements that communicate as if
they were attached to the Broadcast domain, regardless of their physical location.
IP120 supports 802.1p and q packet tagging. VLAN ID and Priority can be set via phone
or web interface.
To configure VLAN settings via Phone interface:
1) Make sure the active User Type is admin or var
2) Press Menu soft key->3.Settings->2.Advanced.
3) Enter the password required, scroll to Network option, press ok button and
select VLAN, then press OK to enter.
4) Choose WAN Port and press OK button to enter.
5) Use the left or right navigation keys to choose and set the VLAN Status; input
the VID Number, Priority.
6) Press OK button to save the settings, or Back soft key to return to VLAN menu.
To configure VLAN settings via Web interface:
Choose Network->Advanced. Perform necessary changes. Check with your system
administrator for more information.

HTTPS

IP120 supports HTTPS (Hypertext Transfer Protocol over Secure Socket Layer). Adding
SSL layer under HTTP, in short, adds a security layer to HTTP. Admins can set this
transmission mode via web page.
To configure HTTPS settings via Web interface:
Go to Network->Advanced, choose Web Server option, in the pull-down menu of Type
field, choose the transmission mode, then click the Confirm button to save the changes.
- 41 -