Table of Contents
Advertisement
Hot Line
Hot Line allows your phone to dial a number automatically if it has been off hook for a
specified time period and no keys have been pressed. Both destination number and
timeout can be configured.
The service is enabled if Hot Line Number has been configured.
To set the hot line number via the phone interface:
Press Menu soft key ->2.Features ->5.Hot Line to enter the configuration page.
Enter the hot line number and press up/down navigation key to select HotLine Delay.
Set the Hot Line Delay (default is 4 seconds), then press the OK button to save the
changes.
To set the Hot Line via the Web interface:
Go to Phone -> Features (General Information)
Anonymous call
Anonymous call, also known as Caller ID restriction, allows you to request the network
to hide your subscriber identity when you are performing outgoing calls.
IP120 supports Permanent Caller ID restriction, meaning that while enabled all calls will
request to be anonymous and you need to disable if you want your identity to be
transmitted. This service can be performed locally, or by sending an activation code to
the network.
Additionally IP120 allows you to automatically reject anonymous incoming calls.
These services can be managed through both phone and Web interfaces.
To set Anonymous call via phone interface:
1) Press Menu soft key -> 2.Features -> 6.Anonym Call to enter the configuration
page.
- 30 -
Advertisement
Table of Contents
