Network Settings; Advanced Network Settings; Vlan - RCA IP110 Operation Manual

You can only configure these settings via Web interface:
1) Go to ACCOUNT [ ACCOUNT SETTINGS.
2) Select desired account.
3) Make desired selections in Advanced section.
Check with your system administrator or service provider for more information.

Network Settings

Please refer to chapter "Configuration and Registration" for the Basic Network
WAN setting information. In the next paragraphs we will describe other Network
related settings.

Advanced Network Settings

VLAN

VLAN is a group of hosts with a common set of requirements that communicate
as if they were attached to the Broadcast domain, regardless of their physical
location.
The IP110 supports 802.1p and q packet tagging. VLAN ID and Priority can be set
via phone or web interface.
To configure VLAN settings via Phone interface:
1) Make sure the active User Type is admin or var
2) Press MENU/BACK[3. SETTINGS[2. ADVANCED.
3) Enter the password required, scroll to Network option, press OK button and
select VLAN, then press OK to enter.
4) Choose WAN Port and press OK button to enter.
5) Use the LEFT or RIGHT navigation keys to choose and set the VLAN Status; input
the VID Number, Priority.
6) Press OK button to save the settings, or MENU/BACK to return to VLAN menu.
To configure VLAN settings via Web interface:
Choose NETWORK[ADVANCED. Perform necessary changes. Check with your
system administrator for more information.
35