Call Waiting Configuration; 3-Way Conference; Voicemail - RCA IP120 Manual

In this situation, user can:
1) Accept the second call using the OK key. The first one will be put on hold
automatically. Or
2) Reject the call using

Call Waiting Configuration

To configure Call Waiting via Phone interface:
1) Make sure active User Type is admin or var
2) Press Menu soft key->2.Features->2.Call Waiting.
3) Use the left or right navigation keys to enable/disable call waiting feature.
4) Use the navigation keys to enable/disable the Play Tone option. This option is
used to define whether to play a short tone when there is an incoming call during an
active call.
5) Press OK button to save the changes, or Back soft key to return to the previous
menu.
To configure Call Waiting via Web interface:
Go to Phone -> Features (General Information)

3-way Conference

Your IP120 is able to establish a three-party conference by locally mixing the audio
signals of your two correspondents.
To establish a conference via phone interface:
1) Once in line with 1
nd
2) Dial 2 party number.
3) When in line with 2
4) Hang up to disconnect all parties.

Voicemail

Your voice mailbox messages, which are usually stored in your local
or hosted VoIP telephony system, can be accessed from your phone.
Mute/Cancel button
st
caller, press Conf soft key, 1
nd
party, press Conf soft key to establish the conference.
- 38 -
st
caller is put on hold.