Basic Configuration Using Phone Keypad - RCA IP120 Manual

Basic Configuration using phone keypad

You will need admin privilege to perform this and other configurations. By default the
phone will be in user mode, so you will need to perform a simple procedure to switch to
admin mode.
Change phone to admin mode: Press MENU 7.User type. Press right navigation key
until you see "admin" on the screen. Then press the down key to be prompted for the
password. It is "admin" by default. Type and press OK.
Network Settings: Press MENU->3.Settings->2.Advanced->OK. Enter the admin
password, and choose Network->WAN Port or VLAN or Web Type or 802.1x
Settings to enter the internet relating configuration page.
Account Settings: Press MENU->3.Settings->2.Advanced->OK. Enter the admin
password, and choose Accounts->OK to configure the account settings.
You find the following fields:
Field
Activation
Label
Display Name
Register Name
User Name
Password
SIP Server
Press up and down buttons to scroll through the parameter list and fill in proper
information. Press OK button to confirm.
Note:
The active User Type is shown with an * on the left of display when you enter Menu
User Type menu, like this:
Description
Enable/disable the account
The name showing on LCD of the phone
The local phone name showing on the other phone
when calling
Register name provided by ISP
User name provided by ISP
Account password provided by ISP
SIP server address provided by ISP
13
7.