Interference Information This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference; and (2) This device must accept any interference received, including interference that may cause undesired operation.
Introduction CAUTION: When using telephone equipment, there are basic safety instructions that should always be followed. Refer to the IMPORTANT SAFETY INSTRUCTIONS provided with this product and save them for future reference. Your RCA 25630 MGCP phone is a high-quality phone providing you with voice communication over an IP Network. It can be optionally equipped with the extension module RCA 25600, to meet your expanded business needs.
Using other power adaptors may damage the unit. Optional Accessories Headset If you have an optional headset, plug the RJ9 headset connector into the headset jack port on the left side of your IP Phone. Press the key to activate the headset mode. RCA 25600 Extension Module The RCA 26500 Extension Module has an additional 28 memory keys for your use.
Page 6
Features vol - Soft Key Soft Key menu (decrease volume Soft Key Left [SKL] Center [SKC] (button) (button) button) Right [SKR] vol + (increase volume button) (cancel button) (mute button) (redial button) line (buttons) (phonebook and (headset (speaker call log button) button) button)
Key Descriptions Feature Key Description Decrease volume vol - Increase volume vol + Accept current menu selection menu Access to configuration menu Cancel current menu selection Phone book and call log Allows headset capabilities with RJ9 headphones Allows handsfree communication Activate or deactivate the mute feature Redial last number Communication Modes...
Call Functions To Make a Call Pick up the handset and dial the phone number. - OR - In on-hook mode, press and dial the phone number. - OR - In on-hook mode, press and dial the phone number. To Answer a Call When the phone is ringing •...
To Answer a Call during a Call Press the corresponding line button to answer the call (this places the initial call on hold). Toggle between calls by pressing the corresponding line button. 2. To end either call push the corresponding line button twice. Switching Between Calls 1.
Phone Personalization NOTE: When in menu configuration mode, press the C (cancel) button repeatedly to return to the main menu without saving changes. Adjust the Volume Press during a conversation or when the phone is ringing. vol + vol - Mute During a call, press .
Alarm Clock: Activate and modify the alarm time, ringer and bell type. 1. Press the menu button. 2. Press Config [SKC]. 3. Scroll to Alarm using the 5 or 6 arrow key and press Select [SKL]. 4. Select configuration, modify and press OK [SKL] to save. Language: 1.
Troubleshooting If your phone is not operating as it should, please refer to the list of the problems in the following table to resolve the issue. Problem Possible Cause No dialing tone No connection to the LAN No display No power “Waiting for CA…”...
Limited Warranty What your warranty covers: • Defects in materials or workmanship. For how long after your purchase: • One year, from date of purchase. What we will do: • Provide you with a new or, at our option, a refurbished unit. The exchange unit is under warranty for the remainder of the original product’s warranty period. How you get service: • Properly pack your unit. Include any cables, etc., which were originally provided with the product. We recommend using the original carton and packing materials. • ”Proof of purchase in the form of a bill of sale or receipted invoice which is evidence that the product is within the warranty period, must be presented to obtain warranty service.” For rental firms, proof of first rental is also required. Also print your name and address and a description of the defect. Send via standard UPS or its equivalent to: Thomson Inc. 11721 B Alameda Ave. Socorro, Texas 79927 • Pay any charges billed to you by the Exchange Center for service not covered by the warranty.
Need help?
Do you have a question about the 25600 MGCP and is the answer not in the manual?
Questions and answers