Basic Configuration Using Phone Keypad - RCA IP120 Operation Manual

Fill the fields and press the SAVE button.
The phone will try to register to the SIP service provider.
If no accounts are successfully registered, the phone will display "No Service" on
the screen.
Note: Should the IP PBX, SIP Server or Service Provider require an authentication, a
correct password is needed. This must be entered via the web user interface.

Basic Configuration using phone keypad

There are three user types programmed into the phone, each one giving a dif-
ferent level of access to settings. These user types are "user", "var" and "admin."
Admin privileges are needed to change certain configurations. By default the
phone will be in user mode.
9