System Settings Choice 2 - Sam4s ER-150 II Operation Manual

P
ROGRAMMING

System Settings choice 2

The following sequence can be used to change the basic system settings.
To Change Settings
• Ensure the slide switch is in the P position
On the number keys type in the answer for question
•
On the number keys type in the answer for question
•
On the number keys type in the answer for question
•
• On the number keys type in the answer for question
• On the number keys type in the answer for question
• Press the PO, and return the slide switch to the R position
a b
Answer
0 Print running Grand Total
a
Do not print the running
1 Grand Total
Do not reset the Grand
0
Total after Z Report
b
Reset the Grand total after
1
Z report
Do not reset the Z Counter
0
after Z report
c
Reset the Z Counter after
1
Z report
Do not reset the receipt
0
consecutive number
after Z report
d
Reset the receipt
consecutive number after
1
Z Report
0 Print Date
e
Do Not Print Date
1
c d
Question
13
a
(the default answer is 0)
b
(the default answer is 0)
c
(the default answer is 0)
d
(the default answer is 0)
e
(the default answer is 0)
PO
e
Explanation
The register has a GT (Grand Total) which
increases with each sale
This option determines if this Grand total is
to be printed on the Financial report
The Grand Total will run indefinitely if not
programmed to reset after each Z financial
report.
Using this option the Grand Total can be
reset back to zero after every Z financial
report.
Every time a Z reset financial report is
printed the report counter increases.
This option determines if the report counter
is reset back to 1 every time a Z reset
report is printed.
Every time the register prints a receipt the
receipt counter increases.
This option determines if the receipt counter
is reset back to 1 every time a Z reset
report is printed.
This determines if the date is printed on the
receipt.