Basic Reference; Setup And Operation Modes (Lcd Display) - Techni-Lux DL-FLEXILED1C30/B Manual

Basic Reference

Digital LCD Display
Menu Setting Buttons
Power Input Cable
This fixture includes a filter frame. This frame can be used to hold a gel or filter
to better assist in controlling your light beam. By using certain filters, it is
possible to create different desired lighting effects. A desired effect might be a
softer or diffused light beam. This can be achieved by using a frosted gel within
the provided frame. Many diffraction materials are available to create different
beam angles with minimal light output losses.

Setup and Operation Modes (LCD Display)

The following refers to the different modes that are available on this fixture via the LCD Control
Panel display. All functions are selectable from the display menu located at the back of the
fixture. DMX and Slave modes require data cables to be connected between fixtures. Master
Mode can run the fixture independently and only requires data cables when linking to fixtures in
Slave Mode. Only one Master can be on a link and no Masters are allowed when using DMX.
When this unit powers up, it will display "System On."
Fuse Holder Female XLR 5-pin
Data Output Cable
Male XLR 5-pin
Data Input Cable
6
Power/Data Indicator
Audio Indicator
Microphone