Dmx Channel Assignments; Fixture Mode (Dmx512); Channel Mode - Techni-Lux DL-FLEXILED1C30/B Manual

DMX Channel Assignments

Fixture Mode (DMX512)

Fixture Mode has several channel configuration options DMX512 control. Fixture Mode
does not display in the standard Control Menu. To access the Fixture Mode options,
before applying power, press and hold the MENU key. Continue holding the MENU key
for approximately 6 seconds after applying power to the fixture. The unit will display
MODE. The factory default MODE is set to "04", the 7 channel DMX. After selecting the
desired mode, press and hold the ENTER key until "Successfully" is displayed. Fixture
will resume operation after short delay or power can be cycled..
Mode Function
Display
01
02
03
04
Using the 7 channel mode provides the most features, however it takes up the most
channels of DMX. The different channel assignments are shown below. The factory
default is the 7 channel mode. We will provide a full description of the values and
functions of the 7 channel mode only. All other modes of less channels, do the same
functions described within the 7 channel mode. Note that the channel order maybe
different for each of the mode.

4 Channel Mode

5 Channel Mode
6 Channel Mode
DMX Mode
4 Channel Mode – Standard RGBW
5 Channel Mode – Adds Master Dimmer
6 Channel Mode – Adds Master Dimmer and Strobe
7 Channel Mode – Adds Master Dimmer and Macro
Channel Function
Channel Function
Channel Function
1 Red (0-255)
2 Green (0-255)
3 Blue (0-255)
4 White (0-255)
1 Red (0-255)
2 Green (0-255)
3 Blue (0-255)
4 White (0-255)
5 Master Dimmer (0-255)
1 Red (0-255)
2 Green (0-255)
3 Blue (0-255)
4 White (0-255)
5 Master Dimmer (0-255)
6 Strobe (0-255)
8