Basic Reference - Techni-Lux DL-LEDPAR1C36O/B User Manual

Basic Reference

Male XLR 3-pin
Data Input Cable
Power Input Cable
Segment LED Display
Menu Setting Buttons
Setup and Operation Modes (LED Segment Display)
The following refers to the different modes that are available on this fixture via the LED
Segment Control Panel display. All functions are selectable from the display menu located at
the back of the fixture.
Control Panel Menu
Use the fixture's Control Panel to access the Control Menu. The MENU Key puts the fixture in
the settings menu itself and also acts as a BACK key between options, UP/DOWN moves
through the menu options and allows the assignment of a value. The ENTER key is used to
enter that option and confirms the selection once the UP/DOWN is used to adjust the value.
When in edit, the display will Flash. Settings are stored and recalled on subsequent power
cycles. R, G, B, refers to Red, Green and Blue respectively. DMX and master/slave modes
require data cables to be connected between fixtures. Manual and some stand-alone modes do
not require data cables for independent use of the fixture.
6
Female XLR 3-pin
Data Output Cable
Power Output Cable